Related DocumentsExternal photosExternal PhotosLabelID Label/Location InfoInternal photosInternal PhotosUser manualUsers Manual

*
*
*
*
*

VERSION: 23-FY17-V03MODEL : GW-6078TBTElectric HeaterNote: This fireplace deserve to be managed via Bluetooth using your apple orAndroid device. Visit the application Store or Google Play and also enter “S.W. Link”in the find bar to download the APP.OPERATING MANUALCUSTOMER organization NO1-888-878-8820IMPORTANTOPERATING INSTRUCTIONSWhen using this or any electrical device, precautions should constantly betaken to alleviate the hazard of fire, electric shock, injury to persons, and/ordamage to property. Please research the following instructions carefullyPRIOR to using this device.1. Read ALL instructions included in this Operating hand-operated BEFOREusing this electrical fireplace insert.2. This electric fireplace insert is warm when in use. To protect against burns, neverallow bare skin to touch warm surfaces. Use handles (if provided) whenmoving this electric fireplace insert. Store all flammable / combustiblematerials, including (but not restricted to) furniture, pillows, bedding, papers,clothes, and also curtains a minimum of 3 feet (0.9m) native this electric fireplaceinsert at every times.3. Ideal ventilation is compelled when operating this electric fireplace insert.NEVER sheathe this device with noþeles which could restrict air circulationto or from the unit.4. To stop a feasible fire, execute NOT download or usage this electric fireplaceinsert straight on carpet, beds, or comparable soft surfaces as this may block airintakes, exhaust outlets or otherwise restrict air circulation beneath theheater.5. Too much caution is important when this electrical fireplace insert is usedby or near children or individuals with restricted mobility.6. Never leave this electric fireplace insert unattended once in use.7. Always unplug this electric fireplace insert as soon as not in use. Revolve off allcontrols before removing the plug from the power source.8. This electrical fireplace insert is designed because that indoor use only. Never usethis device outdoors.9. Affix this electric fireplace insert just to effectively grounded outlets.10. Usage caution and do no strike the glass top top this electrical fireplace insert.11. Never use this an equipment in bathrooms, laundry areas, or similarlocations whereby it may come into contact with water.12. Stop placing the power cord in high traffic areas where that couldbecome damaged or be a trip hazard.13. Do NOT operation the power cord under carpeting, furniture, or appliances.14. Never cover the strength cord through throw rugs, runners, or similarcoverings.15. Perform NOT run this device with a damaged power cord or plug.16. Perform NOT run this machine if the cord i do not care damaged, after the devices malfunctions in any type of way, has been dropped, o r becomesdamaged in any manner. If this happens, discard the unit or go back to anauthorized company facility to inspection and/or repair.17. Execute NOT insert or enable foreign objects come enter any type of ventilation orexhaust opened as this may reason an electric shock, fire, or damages tothis electrical fireplace insert.18. This electrical fireplace insert uses sparks and also arcing in the internaloperation. Never ever use this an equipment in locations where gasoline, paint, or otherflammable liquids are offered or stored.19. Always plug heaters directly into a wall surface outlet/receptacle. Never ever usewith an expansion cord or relocatable strength tap (outlet/power strip).20. Never burn lumber or other products of any type of kind in this electricfireplace insert.21. Constantly use a licensed electrician for any maintenance come this device.22. Constantly use correctly grounded, fused, and polarized outlets.23. Constantly use floor fault security where required by local electricalcode.24. Always disconnect the maker from that power source before moving thedevice or performing any type of cleaning or maintenance.25. Come avoid damages when delivering or storing this electrical fireplaceinsert, constantly keep both the insert and its strength cord in a dry ar andfree from too much vibration.26. Usage this electric fireplace insert only as defined in this OperatingManual. Making use of this an equipment in a manner various other than recommended by themanufacturer may cause fire, electric shock, injury to persons, and/ordamage come property.27. To mitigate the threat of fire, execute not keep or usage gasoline or otherflammable vapors and liquids in the vicinity that the heater.28. Come disconnect heater, turn controls come off, and turn off strength to heatercircuit at main disconnect dashboard .29. To avoid a possible fire, carry out not block air join or exhaust in anymanner.30. Warn the the heater should be effectively installed prior to it is used.31. If the product is not supplied for a long period of time, you re welcome unplug thepower cord from wall outlet to assure safety and security .SAVE these INSTRUCTIONSOPERATION DETAILSReminders1. You re welcome make certain to read through “ important OPERATINGINSTRUCTIONS” above before operation this electric fireplace insert.2. To stop malfunction, please be particular that the input voltage that theelectric fireplace insert and the voltage of her outlet space identicalbefore plugging.3. Check the unit for any kind of damage that might exist (such as lacking screw,dents, etc) prior to using this device.4. This product undergoes strictly examination and testing beforepackaging to insure that all components are in an excellent working condition.Should any defect it is in noticed, contact our customer business number at1-888-878-8820. Remote regulate Battery Installation1. Pull out the battery holder from 2. Location cell battery in the battery holder 3. Assembly complete.the bottom of the far control. Through “+”(positive) mark challenge up tocorrespond the “+” mark on the batteryholder, then press it right into the remotecontrol.Remote manage FunctionReceiverDigital DisplayLow heat level IndicatorHigh heat level IndicatorBluetooth connection IndicatorUPUPDOWNDOWNRemote Controlis at the high level, H and also L indicator will certainly both light up; pressagain, the warm is at the low level, l indicator will certainly light up; thenpress again, warmth stops, and also heating aspect is turn off,both H and L indicator are off.4. is the timer setting button. Press once, the digitaldisplay will certainly blink which suggest the time can be entered, for this reason touch or button may increase or decrease the time in in between 0-12hours.5. rises the time and also temperature. As soon as the setting is attimer setting, push once, the digital display will boost by 0.5(half)hour. Long press this button, time will go up continuously. The optionsare in between 0-12 hours; when the setting is at temperature setting, pressonce, temperature will increase by 1 ℉. Lengthy press this button,temperature will certainly go up continuously. The choices are between60℉-97℉.6. decreases the time and also temperature. As soon as the modeis at timer setting, push once, the digital screen will diminish by0.5(half) hour. Lengthy press this button, time will go down continuously.The choices are in between 12-0 hours; when the setting is at temperaturesetting, press once, temperature will decrease by 1 ℉. Lengthy press thisbutton, temperature will certainly go down continuously. The options are between97℉-60℉.7. < > suggests the Bluetooth connection is successfully paired if theindicator is on. Refer to the operation hands-on in the application to continue.Other crucial Features8. To protect the heater, the fan will certainly continue transforming for quite a fewseconds after heater is close up door down.9. Once the is firstly turned on, only the flame and log work; tohave the warmth to blow out, you have to press . Various other than button, all various other operation switch will role when the poweris turn on.10. If the temperature within of the electric fireplace insert becomesabnormally high, the temperature protection device will rotate onautomatically and the heater will be shut down within a few seconds (fanwill be stopped in roughly 15 seconds of retardation). Any type of operation areprohibited. Please remove the power cord native outlet and wait a fewminutes because that heater come cool down or till temperature defense mechanismreconnect, then plug in the power cord to resume the problem beforethe abnormality the the electrical heater.Temperature setting and operationControl PanelReminder: There room 2 signs at the best side of control panel, when heater has actually its early use and heater role is set at the high level,both L and H indications will irradiate up; when the heater is collection at the low level,only l indicator will light up. This model has thermostat function,when theenvironment temperature reaches the preferred temperature, heater will certainly shutdown automatically; however, the indicator will certainly still light up to let usersknow the heater setting is tho active, not the present heater working level.-There are six(6) buttons top top the far control and also six(6) correspondingbuttons ~ above the control panel of the electric fireplace insert.1. turns the electrical fireplace insert either on or off.When the heater is off, push this button once to turn the heater on;press it again to revolve the heater off.2.

You are watching: Great world ltd electric fireplace gw-2078

controls the brightness of flame and also lo g, there are 5levels. When heater is turned on the first time, flame and also log is in ~ theirbrightest level. Push the button and also the brightness the the logs will beginto change, indigenous the brightest level come the weakest level. Thecorresponding digital screen will blink , , , , because that a period of time.If over there is no various other operation, digital display screen will go earlier to defaulttemperature setting and present environmental temperature.3. controls the heater element. Push once, the heat Under the usage of electric fireplace, touch or , if the temperature shownon digital screen is better than the eco-friendly temperature, heater will certainly be turnedon, warm air will begin blowing; if temperature displayed on digital display is much less than theenvironmental temperature, heater will not revolve on, yet fan will turn and blow cold airfor a while and then stop. Touch or , the digital display will blink, desiredtemperature have the right to be changed between 60-97 ℉, each time they space touched,temperature will boost or to decrease by 1 ℉, temperature ~ above the digital screen willblink number of seconds and stop, then desired temperature is immediately set. Longtouch or willcontinuously rise or diminish the temperature to reach your desiredtemperature faster.After turning on the electric fireplace by pressing , touching, , or will rotate on the heater; however, as soon as thedetector detects the eco-friendly temperature is greater than or equal toyour desired temperature, heater will certainly stop. As soon as environmentaltemperature descend and also is reduced than the wanted temperature, heater willstart working after a while, and it will certainly not prevent until the environmentaltemperature is reached desired temperature.IMPORTANTUnder the condition that the default setting of wanted temperature is 77 ℉,there room 2 possibility:1. Once the insert detects the setting temp. Reduced than 77 ℉, theheater will begin to work-related at high warmth status automatically.2. Once the insert detects the environment temp. Higher than 77 ℉, theheater will an initial blow cold air because that a few seconds, and also then stop.a. If you desire to let the heater come work, simply set the desired temp.from 77 ℉ to be higher than the setting temp(this will show onthe screen panel as soon as the strength is rotate on).NOTE: Default setup of desired temperature is 77 ℉. If the environmentaltemperature is greater than 77 ℉, heater will not revolve on, just cold waiting willblow; if the eco-friendly temperature is less than 77 ℉, heater will rotate onand start blowing warm air.REMINDER: when the environmental temperature is greater than 97 ℉,heater will stop immediately.Timer settingUnder the problem when the electric fireplace is turn on, press to switch to timer setup mode. Time ~ above digital screen will blink.Press or to adjust the hour, which will be the time for heaterto work and also heater will certainly be automatically turned off beyond the hours youset. When the desired time is determined, the digital display will blink for afew seconds, then the moment is immediately set. Lengthy press or, time will repetitively to walk up or down so the you may reachyour preferred hour faster.To cancel timer, push or it rotates the digital display screen show "0 .0H".REMINDER:a. As soon as time will 10 hour, then push , time boost by 1 hourfrom 10:00, 11:00, to 12:00.b. When time reaches 12 hour, then press , timedecrease by 1 hour native 12:00, 11:00, come 10:00.Display dashboard hibernate modeUnder the condition that the electric fireplace is turn on, if over there isn't anyoperation in 12-15 seconds, any type of numbers or indication light displayed ondigital display screen will every disappear. At this condition, touch any kind of buttons(eitherthose ~ above remote control or control panel), digital display will present up thecurrent ecological temperature.Children lock-Touch and also buttons ~ above the manage panel at the exact same time formore 보다 2 seconds, the electric fireplace will certainly be locked, preventingmisuse by children and interference by other remote controls of other homedevices. Also, the far control function of this electric fireplace will certainly alsobe locked. Digital display will present up "L" and also blink 5 times prior to showingback to eco-friendly temperature.-To unlock, again, touch and also buttons ~ above the manage panel atthe same time for much more than 2 seconds.-When youngsters lock function is activated, display screen panel will display up "L"and blink, indicating the electrical fireplace is locked.-When electrical fireplace is locked, and also display panel hibernates after 12seconds, if the electric fireplace is waken increase by touching any type of button ~ above thecontrol panel, display panel will present up "L" and also blink 5 time beforeshowing ago to eco-friendly temperature.Attention1. When first used, the electric fireplace insert might emit a slim odor. Thisis normal and also harmless and also will go awayafter the first few uses.2. The outlet have to beHeaterDo not120V / 60Hz / 15A.Venttouch3. Execute NOT touch the ventwhen heater is turn on. INSTALLATIONReminders1. The dimension of the electrical fireplace insert is 23.38" wide (59.2cm) x20.63" high(52.4cm) x 5.31" deep(13.5cm). You may want to leave aclearance approximately the insert of 1/4"(0.6cm) for easy installation.2.Place the electrical fireplace insert in the desire location or build a wallconstruction in the desire location. The right size of an are for insertingshould be 22.13"(W) x 20.28"(H) x 13"(D).3. The electrical outlet have to be 15A/120V. Make details that the outlet isnear the place where electric fireplace insert is installed so that theuse of an extension cord is no necessary. If expansion cord have to beused, make certain the cord is UL approved and permit 15A/120V power.4. Stop installing the electrical fireplace insert in areas such as bathrooms,kitchen, or wash rooms where extreme moisture or water may bepresent. Carry out NOT location heater on carpet, near drapes or materials thatmay easily capture fire.5.Make certain the 4 rubber feet space attached to the bottom that the electricfireplace insert. Remove them will hinder wait circulation under the unit.6.Minimum installation external dimension: 555mm*513mm*180mm.7.Minimum installation interior dimension: 595mm*527mm*180mm.SpecificationInsert the electrical fireplace insert right into the wood fireplace cabinet/mantelfrom the back. The electrical fireplace insert have to be attached come thecabinet/mantel with the screws had in the hardware kit making use of ascrewdriver (not provided) as shown in the figure below.NOTE : wood fireplace room exterior is only for reference. Install thedevice right into the product you purchased.Wooden Fireplace CabinetMetal ScrewCover that GroundedOutlet BoxGround MeansGrounding PinGrounding Pin(A)(B)(C)(D)MAINTENANCEReminders1. Complying with the “IMPORTANT operating INSTRUCTIONS” and“OPERATION DETAILS” and periodic checks and maintenanceare important to prolong the life of this electrical fireplace insert.2. To avoid the danger of electric shock, constantly disconnect the strength cordfrom the electric outlet before any internal maintain or replacementof components in done.3. Carry out NOT tighten power cord with cords of various other appliances as soon as in use.4. Use caution as soon as opening the metal cabinet the the electric fireplaceinsert throughout inspection and also maintenance. If you require replacement partsor have questions regarding the usage or maintenance of this electricfireplace insert lease call our customer service number at1-888-878-8820.5. Make sure plug is completely inserted right into the electrical outlet to avoid firecaused by short circuit.OUTLET“Grounding instructions :This fireplace is for use on 120V outlets. The cord has a 3-prong plug (SeeFigure A). One adapter is available for connecting 3-prong grounded-typeplug to two-slot receptacles ( See number C). The eco-friendly grounding plugextending indigenous the adapter need to be associated to a long-term groundsuch together a correctly grounded outlet box. The adapter should not be provided ifa three-slot grounded receptacle is no available.ADAPTERNOTFULLYPLUG IN!FULLYPLUG IN!OUTLETSpecification1. There are two strips the LED lamp in the basic of this electrical fireplaceinsert. LED lights space designed for energy efficiency and also long lifeand will certainly rarely must be replaced. However, should you an alert a darksection the the flame or logs, it may be important to replace among theLED bulbs.2. LED lamp generate much less heat when they space on. However, allowat the very least 15 seconds for LED lamp to cool off before touching the LEDlight bulb surface to avoid burning the skin.3. There room two(2) strips that LED lights offered in this electric fireplace insert. 4. To change LED lights:ALWAYS UNPLUG THE electric FIREPLACE INSERT BEFOREPERFORMING any kind of MAINTENANCE.For the strip of LED lamp in the prior of the unit:a. Eliminate the top, and also remove the glass panel and logsfrom the unit.b. Unplug the cable at the end of the piece of LED lights.c. Eliminate the defective LED irradiate from the plastic strip.d. Insert the brand-new LED light and also plug the wire earlier on.e. Plug the electrical cord back into the strength outlet andturn ~ above the unit to verify that brand-new LED irradiate worksf. Re-assemble log, glass, and also top.For the piece of LED lamp in the ago of the unit:a. Remove the earlier panel.b. Unplug the wires that attach the prior LED irradiate andmain board.c. Remove the defective LED irradiate from the plastic strip.d. Insert brand-new LED light and plug the wires ago in.e. Plug the electric cord ago into the strength outlet andturn top top the unit to verify that new LED light worksf. Re-assemble the ago panel.5. Be certain to usage Lithium Battery model CR2025 DC3V. And, do surethe confident side and negative side monitor the indict on the batteryholder.PRODUCT CLEANINGGLASS1.Glass is cleaned during assembly in the factory. However, glassmay acquire dirty or dust throughout transition, installation, or operation.use a clean rug come wipe the surface.2.To clean fingerprints or other marks, you deserve to use a wet rug toclean. Use lint to wipe glass clean to prevent water marks. Toavoid scratches, do not usage detergent or other sprays to cleanthe surface.EXTERIOR CLEANINGUse a clean wet rug to clean the fireplace outside surface, donot use detergent.SERVICEOther 보다 replacing light bulbs and clean the exterior above,other alters or clean please call customer service number at1888-878-8820.CAUTION :Changes or changes not specifically approved by the party responsiblefor compliance could void the user's authority to run the equipment.NOTE:This devices has to be tested and found to comply through the limits for aClass B digital device, pursuant to component 15 of the FCC Rules. Theselimits space designed to carry out reasonable protection versus harmfulinterference in a residential installation. This devices generates, uses,and deserve to radiate radio frequency power and, if no installed and also used inaccordance through the accuse may reason harmful interference to radiocommunications. However, over there is no guarantee the interference willnot occur in a particular installation. If this tools does causeharmful interference come radio or television reception, which can bedetermined by turning the devices off and also on, the user is encouragedto try to exactly the interference through one or an ext of the followingmeasures:-Reorient or relocate the receiving antenna.-Increase the separation in between the equipment and also the receiver.-Connect the devices into an outlet on a circuit various from the towhich the recipient is connected.-Consult the dealer or an experienced radio/TV technician because that help.Limited warranty because that 1 yearCustomer organization number : 1888-878-8820Working hours : Mon-Fri, 9:00am - 5:30pm, Pacific standard time.PRINTED IN CHINAMADE IN CHINA This device complies with component 15 that the FCC Rules. Operation is subject to the following twoconditions: (1) this maker may not cause harmful interference, and (2) this device must accept anyinterference received, including interference the may reason undesired operation.Changes or adjustments not expressly approved by the party responsible because that compliance couldvoid the user's government to operate the equipment.NOTE: This devices has to be tested and found to comply through the limits for a course B digitaldevice, pursuant to part 15 the the FCC Rules. These boundaries are design to carry out reasonableprotection versus harmful interference in a residential installation. This equipment generates, usesinstructions, may cause harmful interference to radio communications.

See more: Scrolling Stops Working Chrome, Is Scroll Wheel Not Working In Chrome

However, there is noguarantee that interference will certainly not take place in a details installation. If this tools does causeharmful interference to radio or television reception, which can be established by transforming theequipment off and on, the user is encouraged to shot to exactly the interference by one or much more ofthe following measures:-- Reorient or relocate the receiving antenna.-- rise the separation between the equipment and receiver.-- attach the tools into an outlet ~ above a circuit various from the to which the recipient isconnected.-- consult the dealer or an competent radio/TV technician because that help.